Zulu Nylon Strap

According to the development history of the auto industry, all-electric cars full beyond or replace the critical point of internal combustion engine car, mainly depends on the battery energy density and the cost of lithium-ion battery, when reached to these two points, pure electric vehicles can be almost twice as many car fuel efficiency, supplemented by more efficient electric power system. This is also one of the reasons why the industries desire to see the future development of new energy vehicles and the relevant heat sink manufacturing capability, especially aluminum heat sink manufacturing.

The expert analysis of liquid cooling heat sink said that how fast the pure electric car can surpass the internal combustion engine car can not be calculated very accurately. In the past few years, we could tell that lithium battery cost are falling at an annual rate of 7%. It is estimated that the cost of lithium batteries is expected to be close to 1 yuan/Wh in 2020 or 2021. 

First of all, 5G development will bring the experience of large bandwidth and HD video, including the first commercial use of drones.

 Second, 5G can deepen and widen the smart grid, including intelligent manufacturing, Internet of vehicles, digital medical and other industries. Meanwhile, 5G slicing technology is needed to provide private network.

Last but not least, it is based on the continuous deepening of the application of the Internet, and relevant standards are still being developed.

However, we found that the application of 5G technology in the power industry are still facing many problems. For example, what 5G thermal solutions can be provided?

The heat sinks of LED lights are generally made of aluminum, which can be divided into two categories: stretched aluminum mainly made of aluminum such as AL6060, and die-cast aluminum mainly made of ADC12.

Among them, the thermal conductivity of ADC12 is 96.7w/m℃, while the one of AL6060 and other aluminum materials is 198-250w/m℃. Obviously the latter is better than the former in terms of thermal conductivity.

Though ADC12 die-casting aluminum can satisfy the general requirements of design aesthetics, but the design of the mould can cost a lot.

The cost of tensile aluminum is generally one tenth of the die-casting mold, and its length is also very flexible, but it can not completely occupy the shell of aluminum heat sink factory. Due to the following points: hardness, deformation, appearance can only be tensile type, changeless, can not meet the market appearance demand.

Aluminum profile heatsink is also known as the heatsink aluminum profile or sunflower aluminum profile, aluminum profile heatsink with beautiful appearance, light weight, heat dissipation performance, good energy saving effect and other characteristics.

The heatsink surface of the processed aluminum profile is anodized for surface treatment to increase the corrosion resistance, wear resistance and appearance of the aluminum.

Aluminum heatsink is die-cast in one piece, so there is no weld leakage problem.

And its biggest advantage is that the product is not subject to the limitation of district heating system, even in the open system of boiler can not be affected by oxygen corrosion due to the modular design of module.

Water tank is an indispensable part of the whole liquid cooling system, its role is mainly to provide a storage space for water cooling liquid, there is such a space, whether for the addition or discharge of liquid are greatly helpful.

The water cooling heat sink uses the method that stream drives heat of the CPU or the graphics card.

A typical liquid cooling system must have the following components: water-cooled blocks, circulating fluids, pumps, pipes, and water tanks or heat exchangers.

A water-colded plate is a metal block with internal channels, made of copper or aluminum, that comes into contact with the CPU and dissipates the CPU's heat.