Bonded fin heat sink is a kind of high power electronic heat sink made of base and finr through mechanical processing. Can be customized according to user requirements, to meet a variety of different cooling needs.

1. Bonded fin heat sink before the mold test, should first adjust the extrusion center, extrusion shaft, spindle and mold seat outlet in a Central Line.

2. During the mold test and normal production process, the heating temperature of aluminum rod should be between 480-520℃.

3. Bonded fin heat sink mold in the mold test or production process, if found blocking, tooth deviation, fast and slow deviation is too big phenomenon to stop immediately, and in the way of point back, try to avoid the scrap of the mold, reduce the loss.

4. In the straightening process, to carefully detect before and after the change of bonded fin heat sink, operating specifications, moderate force, strict guarantee product quality.

5. The operator shall set the scale reasonably according to the requirements of the production plan. When sawing, the feeding speed of sawtooth shall not be too fast to avoid damaging the end.

6. Finished products in the basket to be standardized, including the pad to be placed reasonably, to avoid damage to the profile.